With just a few tools and detailed instructions that accompany your JambBrace, within an hour you can feel the same confidence and security that thousands of other JambBrace users feel knowing their home is more safe.
Tools Required
Circular saw
Electric drill
1/8" drill bit
11/64" drill bit
Chisel
Utility knife
Hammer
Instructions provided are for single unit JambBrace.
Remove door trim.
Remove debris, nails and shims from 1/2" space on both sides of frame
Line up deadbolt hole in JambBrace with door frame deadbolt hole, once in place shim.
(Recommended that you remove weather stripping.) Secure frame using 3 1/2" screws provided. Must also shim behind each hinge and use two 3 1/2" screws for each hinge into trimmer. (Use two holes closest to center frame.)
Drill 11/64" pilot holes through JambBrace for Strike Plate screws. Use 1-1/4" thread cutting screws provided to attach Strike Plates for dead bolt and door knob.
Re-apply both weather strip and trim.
A list of detailed instructions will be provided when you order JambBrace. A video containing step by step instuctions from a professional is also available at
www.locks-pulls.net.
